|
Selected
Publications (also includes accepted/in-press articles)
-
L. M. Smith, R.
Averill, J. Lucas, T. Stoughton, P. Matin, “Influence of Transverse Normal
Stress on Sheet Metal Formability”, International Journal of Plasticity,
19 (2003), 1567 – 1583
-
L. M. Smith, S.
Ganeshmurthy, Kamalesh Alladi, “Double-Sided High-Pressure Tubular
Hydroforming”, International Journal of Materials Processing Technology, 3
(2003), 599 - 608
-
S. Rama, Ke Ma, L.
Smith, “Two Dimensional Approach for Simulation of Hydroforming Expansion
of Tubular Cross-Section without Axial Feed”, Journal of Materials
Processing Technology, 141 (2003) 420 – 430
-
L. M. Smith, S.
Ganeshmurthy, C. C. Chen, T. Lim, P. Murty, “Finite Element Modeling of
the Tubular Hydroforming Process, Part 1: Strain Rate-Independent Material
Model Assumption”, International Journal of Materials Processing
Technology, 147 (1): 121-130 MAR 30 2004
-
H. Gao, G. Barber., S.
Rama, L. Smith, “Finite Element Modeling of Wet Friction Materials”, STLE
Tribology Transactions, 45, 1, 2002, pp. 31-38
-
P. H. Matin, L. M.
Smith, “Practical Limitations to the Influence of Through-Thickness Stress
on Sheet Metal Formability”, Int. Journal of Plasticity, (2005), Vol. 21,
Issue 4, 671 - 690
-
P.H. Matin, L. M.
Smith, L. Petrusevski, “A Method for Stress Space Forming Limit
Diagram Construction for Aluminum Alloys”, Journal of Materials Processing
Technology, 174, 2006, pp. 258 - 265
-
L. M. Smith, T. Sun,
“A Non-Finite Element Approach for Tubular Hydroforming
-
Simulation Featuring a
New Sticking Friction Model”, Int. Journal of Materials Processing
Technology, 171, 2, pp. 214-222, 2006
-
Tong Zhenggou, Tian
Haobon, Lin Jianping, L. M. Smith, “The Study of Formability of TWB’s on
Different Thickness”, Forging & Stamping Technology (in Chinese), 2005, 30
(supplement)
-
Zhou Quan, Tian Haobon, Lin Jianping, L. M. Smith, “Numerical Simulation
on Drawing Process on a Tailor Welded Part”, Forging & Stamping Technology
(in Chinese), 2005, 30 (supplement)
-
L. M. Smith, J.
Caveney, T. Sun, “Fundamental Concepts for “Corner” Forming Limit Diagrams
and Closed-form Formulas for Planar Tube Hydroforming Analysis”, J. of
Manu. Science and Eng., 126, 2006, pp. 874 - 883
-
L. M. Smith, S. Nassar,
S. Ganeshmurthy, J. Burgueno “Design/Analysis Technique for Evaluating
Structural Stiffness Sensitivity to Threaded Bolt Location and
Performance, SAE Transactions/ 2006 Congress
-
“Material Property and Thinning Effects in Double-Sided High-Pressure
Bulge Forming of Sheets”, P. H. Matin, L. M. Smith, NUMIFORM Technical
Conference, Columbus, OH, May 2004
-
“A Non-Finite Element Friction Model for Tube Hydroforming Expansion into
a 90-degree Corner”, T. Sun, W. Yang, L. M. Smith, NUMIFORM Technical
Conference, Columbus, OH, May, 2004
-
"Offset Algorithm for
Compound Angle Machining of Cummins Cylinder Heads”, Pilaka Murty, Randy
Gu, Lorenzo Smith, Phil Szuba, F. Davis, SAE 2005 World Congress &
Exhibition, Detroit, MI, April 2005
-
“Analytical Model for
Elevated Temperature Sheet Metal Forming Processes”, S. Jiang, L. M.
Smith, NUMISHEET Technical Conference, Detroit, MI, August 2005
-
“Influence
of Normal Anisotropy Ratio on Lateral Normal Stress in Aluminum-Steel Clad
Materials”, W. Yang, L. M. Smith, NUMISHEET Technical Conference, Detroit,
MI, August 2005
-
“A Draw Bead Simulator
for a Plurality of Binder Angles”, L. M. Smith*, W. Yang, Sen Jiang, Y.J. Zhou,
D.J. Zhou, C. Du, NUMISHEET Technical Conference, Switzerland,
MI, 2008
-
“Measurement
of Strain localization in a tensile test using full field optical technique
- digital speckle correlation ”, P. Samala, Wang, Zhu, D.J. Zhou, W. Yang,
C. Du, L. M. Smith, L. Yang,SAE 2008-01-0682
-
“A New Experimental
Approach for Obtaining Diffuse-Strain Flow Stress Curves ”, L. M. Smith, C. Wanintrudal,
W. Yang, S. Jiang,Journal of Materials Processing Technology, 2008, in press
-
“Deformable Skin Design to
Enhance Response of Biomimetic Tactile Sensor ”, Nicholas Wettels, Lorenzo M. Smith,
Veronica J. Santos, Gerald E. Loeb, IEEE, 2008, in press
|
